The so-called "suitable" is determined by the magnetic block tied to the front and rear forks and the accelerator control program. That is, as the wheel rotates, the eight LED lights in a specific position will always blink, due to the visual delay we see For a shiny light belt. This kind of lamp overcomes the defect of the handlebar lamp in the recognition of the car silhouette, and provides more reliable lighting and security defense for night driving. The lights for the 27-inch wheels are priced at $250 each. If you are looking for a way to improve your visibility and safety on the road, you might want to consider installing a bicycle LED light on the hub of your wheel. This type of light is powered by a dynamo, which is a device that converts the kinetic energy of your spinning wheel into electrical energy. This means you don’t need to worry about batteries or charging your light, as it will always be on when you are riding.
There are two main types of dynamo hubs: bottle and hub dynamos. Bottle dynamos are mounted on the fork or the frame of the bike, and they rub against the side of the tire to generate electricity. Hub dynamos are integrated into the hub of the wheel, and they use magnets and coils to produce power. Hub dynamos are more efficient, reliable, and durable than bottle dynamos, as they have less friction, noise, and wear and tear. However, they are also more expensive and heavier, and they require a special wheel build.
A bicycle LED light on the hub can be either a front or a rear light, or both. Front lights are usually mounted on the handlebar or the fork, and they provide illumination for the road ahead, as well as making you visible to other road users. Rear lights are usually mounted on the seatpost or the rack, and they alert drivers and cyclists behind you of your presence. Some rear lights also have a brake light function, which increases the brightness when you slow down or stop.
The brightness of a bicycle LED light on the hub is measured in lumens, which is the amount of light emitted by the source. The higher the lumens, the brighter the light. However, brightness is not the only factor to consider when choosing a light. You also need to pay attention to the beam pattern, which is the shape and direction of the light. A good beam pattern should have a wide and even spread, without blinding oncoming traffic or wasting light on the sky. Some lights have different modes, such as high, low, flashing, or steady, which allow you to adjust the brightness and the frequency of the light according to the conditions.
Another feature to look for in a bicycle LED light on the hub is the overvoltage protection, which is a device that prevents the light from getting damaged by excess power from the dynamo. This can happen when you ride at high speeds, or when you use a dynamo hub that is designed for a larger wheel size than your bike. An overvoltage protection device can be either built-in to the light, or added as a separate component.
Some of the benefits of using a bicycle LED light on the hub are:
You don’t need to worry about batteries or charging your light, as it will always be on when you are riding.
You can save money and reduce environmental impact by avoiding disposable batteries or electricity consumption.
You can improve your visibility and safety on the road, especially at night or in low-light conditions.
You can enhance the appearance and style of your bike, as there are many designs and colors to choose from.
Some of the drawbacks of using a bicycle LED light on the hub are:
You need to invest in a dynamo hub, which can be costly and heavy, and may require a special wheel build.
You may experience some drag or resistance from the dynamo, which can affect your speed and efficiency.
You may need to install an overvoltage protection device, which can add to the cost and complexity of the system.
You may not be able to turn off your light, which can be annoying or illegal in some situations.
To summarize, a bicycle LED light on the hub is a great option for cyclists who want a reliable and convenient way to light up their ride. However, it also comes with some trade-offs and challenges, so you need to weigh the pros and cons before making a decision.
If you need to purchase lamps in bulk, please contact us.WOSEN is a professional manufacturer and supplier of Led Flood Light, Led Street Light, Led Solar Light, etc. For more information, please visit https://www.wosenled.com/ or contact admin@wosenled.com or WhatsApp +86-13425434349
