Comparison of Advantages and Characteristics of Large Blister Light-emitting Characters and Inner Light-emitting Characters

Comparison of advantages and characteristics of large-sized plastic luminous characters and inner luminous characters. Price of plastic luminous characters Price of plastic characters has a higher price/performance ratio than that of plastic characters. After analysis, there are the following characteristics: 1, Blister luminous word price Blister word price Because the light is exposed, it is not affected by other things, therefore, the brightness is higher than the plastic letters. 2, the cost is relatively low, the conventional plastic word is also called the light box word, it is composed of two sets of words and the lights inside. Therefore, the cost is relatively high. The LED external light word can be made of iron or stainless steel, and then through the punching lamp, the cost savings. 3, uniform light, due to the size of the stroke by the size of the stroke, ordinary strokes can not go on the assembly method there is no way, so there will be a different brightness of the place. The external LED is a single LED lamp. Therefore, there is no such phenomenon in LED letters (unless the lamp is broken). 4, easy to maintain, exposed word lamp beads can be removed from the outside, and the word side of the plastic light box needs to be removed. For high-rise buildings, it takes a great deal of money to take apart the words and repair them. If it is necessary to build shelves or rent baskets, it can be done.