Solar pest insect reporting light works

The pest indicator light, also known as the insect test light, is a new generation of insect detection and reporting tool. The lamp is made of stainless steel and uses modern light, electricity and numerical control technology to realize automatic processing of the far infrared of the insect body and automatic conversion of the insect bag. The whole lamp automatically runs and other functions. In the unsupervised situation, system operations such as trapping, insecticide, collection, dispensing, and drainage can be automatically completed.

The working principle of the solar pest indicator light is as follows:

[Light Control Working Principle]

When the ambient illuminance is ≧4 lux for one minute - the contact controlled by the numerical control circuit is disconnected, the test light is in the standby state (shutdown); when the ambient illuminance is continuous for one minute <4 lux - the contact controlled by the numerical control circuit is closed, The test light enters the working state (turns on the light).

[rain control working principle]

When it rains (humidity >95%) - the rain control sensor receives the signal - the controller automatically starts - the drainage system enters the working state - prevents rainwater from entering the insect channel, introduces rainwater into the drainage channel, and flows out of the tank from the bottom. . After the rain stops, the nighttime test light returns to the working state, and the daytime test light is in the standby state.

[trapping principle]

The lamp is used as a light source for the insect - the insect flutters - hitting the glass screen - falling into the funnel - falling into the far infrared processing chamber.

[Insect Processing Principle]

Infrared heating is used to treat insects, and live worms die within 3-5 minutes of falling. In order to avoid the accumulation of worms in the processing chamber, the worm moving door in the lower part of the processing chamber is opened once every time (the time can be set on the display according to the actual situation), and the killed worm body falls into the worm box for storage. . In order to enable the last fallen insects to be killed, it is specially set up for two far-infrared heat treatments, and the two movable doors are alternately opened to ensure that each insect body can undergo another far-infrared heat treatment cycle.

[Insect principle]

Every day is bright or according to the time set by the user - the turntable is rotated one space and replaced with the next insect box.

WOSEN is a professional manufacturer and supplier of Led Flood Light, Led Street Light, Led Solar Light, etc. For more information, please visit https://www.wosenled.com/ or contact admin@wosenled.com or WhatsApp +86-13425434349