Specific production steps of street light pole

The production of street light pole lamps is mainly as follows:

It is mainly to unroll the steel coil, flatten it and cut it to the required size. The system consists of six parts: uncoiler and side guide device, flattening machine, shearing device, stacker, electrical system and so on. It is especially suitable for the opening and closing of pole materials such as street lamp poles and flag poles.

 2. Steel plate oblique shear production line;

It is suitable for the longitudinal shearing of long shear plates. The length of the shear plates can be adjusted arbitrarily. With high labor productivity, the hydraulic steel is used to press the plate to be cut on the walking device, and the disk knife is rotated and sheared. The plate is cut with the running device and the plate is pressed when pressing. The oblique size is required, and the tapered plate can be cut. It is especially suitable for the cutting of lamp poles and flag poles.

The equipment is composed of two bending machines, two-stage linkage, to achieve synchronous work, randomly equipped with different lamp pole molds, can be suitable for the production of street lamp poles , flag poles , high pole lights , etc., used in the production of conical lamp poles , Install a conical mold, bend with multiple knives, and finally bend in the middle of the last knife, a conical lamp post is formed. Then use the lamp pole rolling machine to pull out the lamp pole; when you need to produce polygonal lamp poles, sign poles and high pole lights, install a polygonal special mold, multi-blade bending, and finally bend the middle knife, a multi-deformation lamp pole It was formed, and then the lamp post was pulled out with a draw bar rounding machine.

The equipment is composed of a main head, a traction bed, and a feeding cover. The traction bed is clamped by a traction chuck on a sports car to clamp the steel and steel big head car, and the steel rod is moved from the small head to the big head. The claws move at a constant speed, the big end of the steel rod is hijacked by the loose steel rod trolley, and the guide wheel on the machine head realizes automatic butt joint. When the steel rod is jointed, the welding machine starts undulating welding. , Automatic flux recovery, uniform welding seam, continuous and beautiful appearance, strong penetration, one-time joint welding, high welding efficiency, speed of 23 meters per minute, 3 times that of gas shielded welding, the cost is lower than gas welding, is the current domestic lamp post The industry has the fastest welding speed, good effect, and the lowest price equipment. This equipment mainly welds street lamp poles and flag poles, and sign poles and high pole lamps with large pole bodies generally do not need this equipment. Sign poles and high pole lights with relatively large pole bodies generally do not require this equipment.

This machine is a special equipment suitable for the jointing of high pole lights and sign poles after bending. The machine is driven by the turbine and worm to join the joints, which can be linked or single-operated. It is performed in conjunction with manual electric welding. It has high efficiency. After spot welding, it is welded on the semi-automatic welding production line. Make a full circle.

  6. Semi-automatic welding production line

This machine is non-luminous welding, fast welding speed, suitable for all kinds of rods, convenient and rapid manual adjustment, uniform welding seam, continuous and beautiful, strong penetration, one-time forming, speed 1-3 meters / minute, 3 times that of gas shielded welding, It is a sign post after the seam of the mechanical seaming machine, and necessary equipment for welding with high pole lights.

The device has a simple and compact structure and is convenient. During the specific operation, the steel rod can be manually placed on the pressing mold, and there are personal holding, hand-holding, and button point pressing type. The straightness of the steel pole is controlled by manual visual inspection, and the efficiency is high. The device can straighten any shape of street lamp pole, sign pole, flag pole and high pole lamp, and the head is round.

According to design requirements, the heads of some street lamp poles need to be bent, that is, self-bending arm street lamp poles, which are composed of a main board and a bending die. Equipped with two sets of molds, the straight mold is cleaned by the reducer, and the steel tube pressed on the round mold is bent along the round mold. The operation is simple, without heating and fillers, and the upper part of the cone lamppost can be directly bent. Essential equipment for rod manufacturers.

The above content is provided by WOSEN. WOSEN is a professional manufacturer and supplier of Led Flood Light, Led Street Light, Led Solar Light, etc. For more information, please visit https://www.wosenled.com/ or contact admin@wosenled.com or WhatsApp +86-13425434349